features select models are compliant with aec-q200 rev-c stress test quali cation for passive components in automotive applications (see chart below) rohs compliant* esd protection >25 kv low capacitance <0.5 pf low leakage current <50 na applications hdmi 1.4 digital visual interface (dvi) usb 3.0 / usb otg memory protection sim card ports automotive chipguard ? mlc series - esd protectors *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci c applications. general information electrical characteristics @ 25 ? (unless otherwise noted) parameter symbol cg0402mlc- unit 3.3lg 05lg 12lg 24lg 3.3lga 05lga 12lga 24lga typical continuous operating voltage v dc 3.3 5 12 24 3.3 5 12 24 v typical clamping voltage (note 1) v c 25 v maximum capacitance @ 1 vrms 1 mhz c o 0.5 pf maximum leakage current @ max. vdc i l 5na typical trigger voltage (note 2) v t 250 v maximum response time r t 1ns esd protection: per iec 61000-4-2 level 4 min. contact discharge min. air discharge min. air discharge ? ?5 (note 3) ?5 kv kv kv operating temperature t opr -40 to +85 -40 to +125 ?c storage temperature t stg -55 to +150 ?c the chipguard mlc series has been speci cally designed to protect sensitive electronic components from electrostatic discharge damage. the mlc family has been designed to protect equipment to iec61000-4-2, level 4 (? kv contact / ?5 kv air discharge) esd speci cations targeted for high speed usb 3.0/usb otg, hdmi 1.4, dvi or ieee1394 applications. the chipguard mlc series has been manufactured to provide low 0.5 pf capacitance and leakage currents less than 50 na with excellent clamp qualities, making the family almost transparent under normal working conditions. device symbol v notes: 1. per iec 61000-4-2, level 4 8 kv contact discharge. measurement 30 ns after initiation of pulse. 2. per iec 61000-4-2, level 4 8 kv contact discharge. measurement at maximum pulse voltage. 3. iec 61000-4-2 esd performance for cg0603mlc-05e and cg0603mlc-12e devices will meet minimum 100 reps. some shifting in characteristics may occur when tested over several hundred esd pulses. all other part numbers listed will meet iec 61000-4-2 esd performance with minimum 1000 reps without degradation in performance. parameter symbol cg0603mlc- unit 3.3le 05e 05le 12e 12le 24le 3.3lea 05lea 12lea 24lea typical continuous operating voltage v dc 3.3 5 5 12 12 24 3.3 5 12 24 v typical clamping voltage (note 1) v c 25 20 25 30 25 v maximum capacitance @ 1 vrms 1 mhz c o 0.5 pf maximum leakage current @ max. vdc i l 550550 5 na typical trigger voltage (note 2) v t 250 150 250 150 250 v maximum response time r t 1ns esd protection: per iec 61000-4-2 level 4 min. contact discharge min. air discharge min. air discharge ? ?5 (note 3) ?5 kv kv kv operating temperature t opr -40 to +85 -40 to +125 ?c storage temperature t stg -55 to +150 ?c *rohs compliant aec approved (select models) aec approved models model aec-q200 cg0603mlc-05e ? yes cg0603mlc-12e ? yes
chipguard ? mlc series - esd protectors product dimensions cg0402 cg0603 dimension series series l 1.00 ?0.15 1.60 ?0.20 (0.04 ?0.006) (0.064 ?0.008) w 0.50 ?0.10 0.80 ?0.20 (0.02 ?0.004) (0.032 ?0.008) a 0.36 ?0.05 0.45 ?0.10 (0.014 ?0.002) (0.018 ?0.004) b 0.25 ?0.15 0.30 ?0.20 (0.10 ?0.006) (0.012 ?0.008) dimensions: mm (inches) recommended pad layout solder re ow recommendations 110 sec. (min.) 300 250 200 150 100 50 0 30-70 sec. temperature ( c) 120 sec. (min.) preheat stages 1-3 soldering cooling time (seconds) ? this product can be damaged by rapid heating, cooling or localized heating. ? heat shocks should be avoided. preheating and gradual cooling recommended. ? excessive solder can damage the device. print solder thickness of 150 to 200 um recommended. ? solder gun tip temperature should be kept below 280 ? and should not touch the device directly. contact should be less than 3 seconds. a solder gun under 30 watts is recommended. a stage 1 preheat ambient to preheating 30 s to 60 s temperature b stage 2 preheat 140 ? to 160 ? 60 s to 120 s c stage 3 preheat preheat to 200 ? 20 s to 40 s d main heating 200 ? 60 s to 70 s 210 ? 55 s to 65 s 220 ? 50 s to 60 s 230 ? 40 s to 50 s 240 ? 30 s to 40 s 250 ? to 255 ? 5 s e cooling 200 ? to 100 ? 1 ?/s to 4 ?/s cg0402 cg0603 dim. series series a 0.51 0.76 (0.020) (0.030) b 0.61 1.02 (0.024) (0.040) c 0.51 0.50 (0.020) (0.020) d 1.70 2.54 (0.067) (0.100) l w b a a c b d speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci c applications.
chipguard ? mlc series - esd protectors packaging dimensions top tape notes: tape material is paper. cover tape adhesion is 40 15 grams. tape thickness is 4.00 0.10 (0.16 0.004) d g 8.00 0.30 (0.32 0.012) 0.48 0.03 (0.019 0.0012) 3.50 0.05 (0.14 0.002) c l w 1.50 0.10 (0.06 0.004) 2.0 0.50 (0.08 0.02) 180.8 2.0 (7.12 0.08) 9.0 0.50 (0.36 0.02) 13.0 1.0 (0.52 0.04) 13.0 0.50 (0.52 0.02) 62.0 1.50 (2.48 0.06) 21.0 0.80 (0.84 0.032) dimensions: mm (inches) how to order cg 0n0n mlc - n.n x x x chipguard product designator package option 0402 = 0402 package 0603 = 0603 package multilayer series designator operating voltage** 3.3 = 3.3 v 05 = 5 v 12 = 12 v 24 = 24 v low leakage current option l = low leakage current blank = standard product tape & reel packaging e = 5,000 pcs. per reel (0603 package) g = 10,000 pcs. per reel (0402 package) operating temperature option a = higher +125 ? operating temperature blank = standard product ** only models lower than 10 volts require decimal point. rev. s 06/13 cg0402 cg0603 dimension series series c 1.75 ?0.05 1.75 ?0.10 (0.04 ?0.002) (0.04 ?0.004) d 2.00 ?0.02 2.00 ?0.05 (0.08 ?0.0008) (0.08 ?0.002) l 1.12 ?0.03 1.80 ?0.20 (0.045 ?0.0012) (0.072 ?0.008) w 0.62 ?0.03 0.90 ?0.20 (0.025 ?0.0012) (0.036 ?0.008) g 2.0 ?0.05 4.0 ?0.05 (0.08 ?0.002) (0.16 ?0.002) asia-paci c: tel: +886-2 2562-4117 ?fax: +886-2 2562-4116 europe: tel: +41-41 768 5555 ?fax: +41-41 768 5510 the americas: tel: +1-951 781-5500 ?fax: +1-951 781-5700 www.bourns.com speci cations are subject to change without notice. the device characteristics and parameters in this data sheet can and do vary in different applications and actual device perfor mance may vary over time. users should verify actual device performance in their speci c applications.
|
